Digit Matching Table To Class Assignment - NEC Xen IPK Programming Manual

December 2004
8-Digit Matching Table to
Class Assignment
General Description
Use this Memory Block to program, per Class, each 8-digit Matching Table to allow or deny.
Classes 00 and 15 are fixed. Only classes 01
Display
Data Title
No. 1~7
6 1 : C L S 0 1 ( 0 0 ) =
T I M E
Settings
LK 1 LK 2
NON Allow (YS) Deny (NO)
LK 5 LK 6
Programming Procedures
Go off-line.
1
2 Press LK1 + LK1 + FA
3 Press the corresponding CO/PBX line key to change the data option.
Note: Class 00 and 15 cannot be programmed.
Class 00 has no restrictions (Allow)
Class 15 has restricted outgoing (Deny)
Refer to the table on the next page.
N
4 Press to write the data and advance to the next table. Repeat Steps 3 and 4 for each table.
5 After data for the last table is entered, press
P
6 Press to go back on-line.
Related Programming
M.B. Number
Refer to Section 6 Code Restriction in this chapter.
DRAFT 3
100 – Chapter 1
14 can be programmed.
~
Class
No. Table Setting
01~14 00~15 Data
Y S
D I S P L A Y
LK 3 LK 4
The shaded area indicates
the default setting.
LK 7 LK 8
to access the Memory Block.
N
to write the data.
Memory Block Name

8-Digit Matching Table to Class Assignment, 1-1-61

NEC Business Solutions Ltd
1-1-61
System Mode
1
Submode
1
Data No.
61
PC Programming
+ AC