Pbr Receive Level Assignment For Automated Attendant Disa - NEC Xen IPK Programming Manual

December 2004
PBR Receive Level
Assignment for Automated
Attendant/DISA
General Description
Use this Memory Block to specify the receiving level of the Push Button Receiver (PBR) at the
Automated Attendant/Direct Inward System Access (DISA).
Display
Data
No. Title
0 2 : P B R
T I M E
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 + KB
3 Use the dial pad to change the data option. The information that can be
entered includes:
N
4 Press to write the data and advance to the next PBR.
5 Enter next PBR, and press
P
6 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. When the Automated Attendant answers, the DTMF signal level from the calling party is reduced from the Public
Switching Telephone Network (PSTN). This Memory Block specifies the minimum detectable receiving level. Setting
Data 15 is the most sensitive.
2. PBR 1 data is for Channels 1 and 2 and PBR 2 is for Channels 3 and 4 in the CPUI( )-U( ) ETU/MBD-U( ) Unit.
DRAFT 3
218 – Chapter 1
PBR
No.
Setting
1/2
Data
1 = 1 3
D I S P L A Y
to access the Memory Block.
Setting Data Receiving Level
00 -33.0 dBm
01 -34.0 dBm
02 -35.0 dBm
03 -36.0 dBm
04 -37.0 dBm
05 -38.0 dBm
06 -39.0 dBm
07 -40.0 dBm
08 -41.0 dBm
09 -42.0 dBm
10 -43.0 dBm
11 -44.0 dBm
12 -45.0 dBm
13 -46.0 dBm
14 -47.0 dBm
15 -48.0 dBm
N
to write data.
PBR Receive Level Assignment for Automated Attendant/DISA, 1-8-02
NEC Business Solutions Ltd
1-8-02
System Mode
Submode
Data No.
PC Programming
Default Values (PBR 1 and 2)
Setting Receiving
Data Level
05 -46 dBm
1
8
02
+ AU