Isdn Trunk Directory Number Assignment - NEC Xen IPK Programming Manual

Xen IPK
ISDN Trunk Directory
Number Assignment
General Description
Use this Memory Block to assign the Integrated Services Digital Network (ISDN)
Directory Number.
Display
CO/PBX
No. Data
(01~64) No.
0 1 / 5 2 :
T I M E
Programming Procedures
1 Go off-line.
N
2 Press LK3 + +
3 Enter Data using the Dial Pad:
Note: Use the following to enter data:
J
to move the cursor left
L to move the cursor right
K ~ I to enter numeric data
R
to go to the next CO/PBX Line No.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. If CFE feature is to be used, the GDN number must be set for BRI.
2. If DID is used in conjunction with PRI, do not assign any number to CO.
3. Enter the Area Code as part of directory number, e.g. Melbourne = 3xxxx xxxx

3-52, ISDN Trunk Directory Number Assignment

Setting Data
(20 digits maximum)
D I S P L A Y
EB to access the Memory Block.
Programming Manual
System Mode
3
Submode
—
Data No.
52
PC Programming
+ AV
DRAFT 3
Chapter 1 – 385
3-52