NEC Xen IPK Programming Manual page 542

December 2004
Timer
Hold Recall Time
Selection
(Exclusive)
Attendant Add-On
Console Transfer/
Camp-On Recall
Timer Selection
First Delay
Announcement
Start Time Selection
First to Second
Delay
Announcement
Interval Time
Selection
Second Delay
Announcement
Repeat Interval
Time Selection
Delayed Ringing
Timer Assignment
(CO)
ISDN DTMF
Duration/Interdigit
Time Selection
ISDN Dial Interval
Timer Selection
Internal Paging
Timeout Selection
Automatic Callback
Release Timer
Selection
Call Forward No
Answer Timer
Selection
System Call Park
Recall Time
Selection
DRAFT 3
522 – Chapter 1
Function Timer Chart (Continued)
Table 1-3:
Memory
Block
Specify the time for Exclusive Hold
1-1-63
Recall.
Specify the time for a ring transfer
1-1-64
from the DSS Console until the
recall alarm is sent.
Specify the time between
1-1-71
receiving an incoming CO call and
sending the First Delay
Announcement to the caller.
Specify the time between the First
1-1-73
and Second Delay
Announcement.
Specify the time between repeated
1-1-75
Second Delay Announcement.
Specify the time for delayed
1-1-77
ringing on incoming outside line
calls.
Specify tone duration and interdigit
1-180
time of Dual-Tome Multifrequency
(DTMF) signals for the ISDN
Trunk.
Specify the dial interval timer for
1-1-81
ISDN lines when dialling from a
PHS
Specify the time allowed for
1-2-00
paging.
Time duration before Automatic
1-2-02
Callback is automatically
cancelled.
Specify time before ICM or Trunk
1-2-22
calls are forwarded.
Time before a parked call recalls
1-2-23
to the station that parked the call.
Definition
NEC Business Solutions Ltd
Timing Value
Minimum Default
30 sec. 1 min.
30 sec. 1 min.
0 sec. 20 sec.
0 sec. 20 sec.
0 sec. 20 sec.
0 sec. 15 sec
70/60 ms. 100/70 ms.
2 sec. 8 sec.
90 sec. 90 sec.
30 sec. 30 min.
4 sec. 8 sec.
30 sec. 1 min
Section 5, Function Timer Chart
Maximum
No Limit
10 min.
60 sec.
No Limit
No Limit
99 sec.
900/200 ms.
32 sec.
No Limit
30 min.
60 sec.
10 min.