Or 4-Digit Station Number Selection - NEC Xen IPK Programming Manual

Hide thumbs Also See for Xen IPK:
Table of Contents

Advertisement

December 2004
2-, 3-, or 4-Digit Station
Number Selection
General Description
Use this Memory Block to determine the number of digits for station numbers. Either 2-digit
(00~99), 3-digit (000~999), or 4-digit (0000~9999) assignment is available.
With IPK R2000 and above, 5, 6 or 7 digit numbering is allowed.
Display
Data
No.
0 3 : S T A . N O .
T I M E
Settings
LK 1
LK 2
2-digit
3-digit
LK 5
LK 6
6-digit
7-digit
Programming Procedures
Go off-line.
1
2
Press LK1 + LK2 +
KC
3
Press the corresponding CO/PBX line key to change the data option.
N
4
Press
to write the data.
P
5
Press
to go back on-line.
Related Programming
M.B. Number
1-1-46
Access Code (1-Digit) Assignment
1-1-47
Access Code (2-Digit) Assignment
4-10
Station Number Assignment
N
1. The Station Numbering Plan can be 2, 3, or 4 digits; however, only one plan can be used at a time.
2. After a change is made in this Memory Block, all station numbers must be reassigned in Memory Block 4-10 Station
Number Assignment.
3. Station Numbering Plan 2 and 3 digit use Memory Block , 1-1-46 , Access Code (1-Digit) Assignment to set leading
extension number range, e.g. Memory Block , 1-1-46, 1=001 then 10~19 in 2 digit and 100~199 in 3 digit assignment
is possible in Memory Block , 4-10.
Station Numbering Plan 4 digit uses Memory Block , 1-1-47, however, all single digit codes in Memory Block , 1-1-46
require to be set to "Not Used" 000 for Memory Block , 1-1-47 to be effective,
e.g. Memory Block , 1-1-460=080
1~9=001 etc.
1~9 must be set to 000 before Memory Block , 1-1-47 can be used to set extension range.
DRAFT 3
132 – Chapter 1
Setting
Title
Data
3 D G T
D I S P L A Y
LK 3
LK 4
The shaded area indicates
the default setting.
4-digit
5-digit
5, 6 or 7 Digit numbering is
LK 7
LK 8
applicable for IPK R2000
and above.
to access the Memory Block.
Memory Block Name

2-, 3-, or 4-Digit Station Number Selection, 1-2-03

NEC Business Solutions Ltd
1-2-03
System Mode
1
Submode
2
Data No.
03
PC Programming
+BS

Advertisement

Table of Contents
loading

Table of Contents