System Refresh Timer Assignment - NEC Xen IPK Programming Manual

Xen IPK
System Refresh Timer
Assignment
General Description
Use this Memory Block to assign the System Refresh Time during idle periods/no change
in state.
Display
Data
No.
1 1 : R E F R E S H
T I M E
Settings
LK 1 LK 2
No Refresh 4 hr.
LK 5 LK 6
24 hr.
Programming Procedures
1 Go off-line.
Press LK1 + LK8 +
2 AA
Press the corresponding CO/PBX line key to change the data option.
3
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. The system automatically refreshes itself during idle periods based on the time specified in this Memory Block.
2. If there is a call in progress during Refresh Time activity and no other actions occurring in the system at that time, the
system will refresh.

1-8-11, System Refresh Timer Assignment

Setting
Title Data
4 H
D I S P L A Y
LK 3 LK 4
8 hr. 12 hr.
LK 7 LK 8
to access the Memory Block.
The shaded area indicates
the default setting.
Programming Manual
1-8-11
System Mode
1
Submode
8
Data No.
11
PC Programming
+ BM
DRAFT 3
Chapter 1 – 231