External Speaker Control - NEC SL1100 Programming Manual

ISSUE 6.0
Level:
IN
Description
Use Program 31-06 : External Speaker Control to define the settings for the external speaker using
an amplifier.
Input Data
External Speaker Number
Item Item
No.
01 Broadcast Splash
Tone Before Paging
(Paging Start Tone)
02 Broadcast Splash
Tone After Paging
(Paging End Time)
03 Speech Path
04 CODEC Transmit
Gain Setup
05 CODEC Receive Gain
Setup
Conditions
None
Feature Cross Reference
• Paging, External
Programming Manual
Program 31 : Paging Setup

31-06 : External Speaker Control

Input Data
0 = No Tone (None) Use this option to enable or disable splash
1 = Splash Tone tone before Paging over an external zone.
2 = Chime Tone If enabled, the system broadcasts a splash
tone before the External Paging an-
nouncement.
0 = No Tone (None) Use this option to enable or disable splash
1 = Splash Tone tone after Paging over an external zone. If
2 = Chime Tone enabled, the system broadcasts a splash
tone at the end of an External Paging an-
nouncement.
0 = Both Way (Duplex) Determine if the external speaker will be
1 = One Way (Simplex) used for talkback (As this option is not
available with the CPU external page
zone, speaker 9 should be left at 1).
1 ~ 63 (- 15.5 ~ + 15.5
dB)
1 ~ 63 (- 15.5 ~ + 15.5
dB)
1 ~ 3
Description
SL1100
Program
31
Default
2
2
1
32
32
2-329