Co/Pbx Answer Key Operation Without Ringing Assignment (Day Mode) - NEC Xen IPK Programming Manual

December 2004
CO/PBX Answer Key
Operation without Ringing
Assignment (Day Mode)
General Description
This Memory Block is used to disable Ring Assigned telephones from ringing during Day and
allowing Message Waiting and Answer Key to blink, therefore allowing calls to be answered.
Display
Tel Port No.
Data
(01~99)
No.
A0~C0
0 1 / 5 2 : R I N G
T I M E
Settings
LK 1 LK 2
NO YS
LK 5 LK 6
Programming Procedures
1 Go off-line.
Press LK4 + to access the Memory Block.
2 EB
3 Press the corresponding CO/PBX line key to change language option.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
4-01 CO/PBX Ring Assignment (Day Mode)
4-02 CO/PBX Ring Assignment (Night Mode)
N
1. Telephone ports A0~C0 are ports 100~120.
2. Setting to YES - the telephone will ring for all Ring Assigned lines set in Memory Blocks , 4-01 and , 4-02.
3. Setting to NO - the telephone will not ring for any Ring Assigned lines however the Message Waiting Lamp and
Answer Key will flash. When NO is selected neither Caller ID nor Trunk Name Assignment will be displayed.
DRAFT 3
458 – Chapter 1
Setting
Title Data
D N O
D I S P L A Y
LK 3 LK 4
The shaded area indicates
the default setting.
LK 7 LK 8

CO/PBX Answer Key Operation without Ringing Assignment (Day Mode), 4-52

Memory Block Name
NEC Business Solutions Ltd
4-52
System Mode
4
Submode
—
Data No.
52
PC Programming
+ BTT