NEC Xen IPK Programming Manual page 60

December 2004
Related Programming
M.B. Number
1-1-07 Tie Line Delay Ringing Timer Selection
3-07 CO/PBX Ringing Variation Selection
4-01 CO/PBX Ring Assignment (Day Mode)
4-02 CO/PBX Ring Assignment (Night Mode)
4-68 Telephone Ringing Variation Selection
4-71 Time Class Assignment for Telephone Mode (R2000 and above)
N
1. Memory Blocks 4-01 CO/PBX Ring Assignment (Day Mode) and 4-02 CO/PBX Ring Assignment (Night Mode) must
be set to ring.
2. CO/PBX lines assigned for DIT/ANA do not activate this feature.
3. Tie/DID lines assigned for Delayed Ringing follow this assignment after the delayed ringing starts.
4. This feature uses the same ringing tone (Low, Medium, High) that can be selected in Memory Blocks 3-07 CO/PBX
Ringing Variation Selection and 4-62 Telephone Ringing Variation Selection. If High is selected in those Memory
Blocks, this feature does not function.
5. Select No Limit (∞) to disable this feature.
DRAFT 3
40 – Chapter 1
Memory Block Name
CO/PBX Incoming Ringing Alarm Time Selection, 1-1-06
NEC Business Solutions Ltd