Programming Screens - NEC Xen IPK Programming Manual

Xen IPK
SECTION 5
PROGRAMMING
SCREENS
Section 5, Programming Screens
Main Menu
When the MAT software program is launched, the Main Menu screen is
displayed first. This screen allows the user to access the options used to
program the Xen system. Figure 3-4: Xen IPK Maintenance Access Terminal
Software Screen Samples shows the menu and describes the layout.
Pulldown Menu
Pulldown menus are available for each function involved in programming
the Xen system. To access the data associated with the function, click on
the function name on the Main Menu. Some of the options on the initial
pulldown menu offer several selections. An arrow to the right of the option
name indicates additional selections are available. Refer to Figure 3-4: Xen
IPK Maintenance Access Terminal Software Screen Samples for an example of a
Pulldown Menu.
System Data Screen
When an option is selected from a pulldown menu, a screen is displayed
that allows the user to program data for the function selected. Figure 3-4:
Xen IPK Maintenance Access Terminal Software Screen Samples shows an
example of a System Data Screen. This screen indicates three tabs. The
tabs indicate system data items that are grouped together for programming.
The active tab group is indicated by a box around the tab title. In the
example, the displayed data is for the Terminal/System Wide tab group. To
access another tab group, press the tab or use the keyboard shortcut.
Keyboard shortcuts are displayed at the bottom of the screen in the
Information Bar.
Programming Manual
DRAFT 3
Chapter 3 – 603