NEC Xen IPK Programming Manual page 548

December 2004
DRAFT 3
528 - Chapter 1
6.3 Memory Blocks
The following related Memory Blocks are used when assigning
Code Restriction.
Trunk to Tenant Assignment
Trunk-to-Trunk Group Assignment
Trunk Type Selection
PBX/CTX Access Code Assignment I
PBX/CTX Access Code Assignment II
OCC Table Assignment
OCC Table to Trunk Group Assignment
8-Digit Matching Table to OCC Table Assignment
8-Digit Matching Table to Normal Dial Assignment
8-Digit Matching Table to Trunk Group Assignment
8-Digit Matching Table Assignment
8-Digit Matching Table to Class Assignment
Code Restriction Class Allow/Deny Assignment
System Speed Dial Restriction by Tenant
System Speed Dial Override by Class Selection
Tie Line Code Restriction Assignment
Code Restriction Class Assignment When Lockout is Set
CO Feature Codes Service for Code Restriction
Trunk Digit Restriction
Code Restriction Class Assignment (Day Mode)
Code Restriction Class Assignment (Night Mode)
Telephone to Tenant Assignment
6.4 Memory Block Description
6.4.1 General
This section describes the function of the Memory Blocks
directly related to Code Restriction. Some Memory Blocks from
the previous list are not described here but are included
because of their effect on Code Restriction (
Tenant Assignment). Code Restriction is based on Trunk group
and consideration should be given to this Memory Block
because stations are assigned to a tenant, and trunks are
assigned to a Trunk group.
NEC Business Solutions Ltd
Title Memory Block
2-01
3-03
3-91
1-1-24
1-1-25
1-1-67
5-03
1-1-68
1-1-66
5-02
1-1-60
1-1-61
1-1-65
1-1-18
1-1-62
1-1-69
1-1-70
1-1-82
4-32
4-07
4-08
4-09
e.g.
, Trunk to
Section 6, Code Restriction