NEC Xen IPK Programming Manual page 44

December 2004
LK 3 CO/PBX Line Mode (Continued)
Data
Memory Block Name
No.
29 Trunk Internal Transmit Pad Selection
30 Trunk Internal Receive Pad Selection
31 Trunk External Transmit Pad Selection
32 Trunk External Receive Pad Selection
33 Disconnect Recognition Time Selection
38 Automated Attendant Message to Trunk
Selection
39 Automatic Release Selection
41 ACD/UCD Delay Announcement
Assignment
42 DIT Assignment
43 ANA Assignment
44 Caller ID Display Assignment for CO/PBX
Line
45 Live Recording Trunk Selection
52 ISDN Trunk Directory Number
Assignment
53 Caller Name Indication Selection
57 ISDN Dial-Out Sending Selection
59 Automated Attendant Function Selection
61 DIT Delay Answer Timer Selection
62 DIT Tenant Assignment
63 DIT Holiday Mode Enable
64 DIT Night Mode Delay Answer Enable
65 Hold Tone Automated Attendant
Selection
67 CO Line Ringing Pattern Selection
for CO/PBX Line Mode
70 CIC Number Assignment
71 Caller Name Display Assignment
24 – Chapter 1
Default Value
2 dB
4 dB
0 dB
0 dB
2.0 sec.
Message 1
Yes
Refer to ACD/UCD Delay Announcement Assignment on page 1-380.
No Assignment
No Assignment
Not Specified
No
Not Specified
Trunk Name
Normal
Trunks (1-64) = 0 sec.
All CO/PBX Lines are set
to tenant 00
Holiday DIT = YES
Night DIT = NO
All CO/PBX lines are set
to "NON"
— = NON
DRAFT 3
NEC Business Solutions Ltd
Programming Values
2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB, -3
dB, 0 dB
2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB, -3
dB, 0 dB
2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB, -3
dB, 0 dB
2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB, -3
dB, 0 dB
0 sec., .2 sec., .3 sec., .5 sec., .7 sec.,
sec.,
1.0 sec., 1.2 sec., 1.4 sec., 1.5 sec., 1.7 sec.,
1.9 sec., 2.0 sec., 2.2 sec., 2.4 sec., 2.6 sec.
Message 1~8
Yes, No
Station No.
Station No.
Telephone Port 01~96
No = No Live Recording
Yes = Live Recording
Up to 13 digit per a CO/PBX Port No.
No Indication, Caller No. Indication, Name
Indication (by SPD), Trunk Name
Normal, Delay Announcement
0s, 5s, 10s, 20s, 30s, 40s, 50s, 60s
Trunk (1-64) can be set to a tenant (00-47)
NO, YES
NO, YES
NON, MSG1, MSG2, MSG3, MSG4, MSG5,
MSG6, MSG7, MSG8
Pattern A~H
Multiline Terminal Programming
.9