Printer Connected Selection - NEC Xen IPK Programming Manual

December 2004

Printer Connected Selection

General Description
Use this Memory Block to program when a printer or PC is connected for SMDR use. If
the printer is disconnected from the system, an alarm sounds at stations connected to Ports
01 and 02.
Display
Data
No.
1 3 : P R I N T E R
T I M E
Settings
LK 1 LK 2
No PC
LK 5 LK 6
Programming Procedures
1 Go off-line.
2 Press LK1 + LK5 + AC
3 Press the corresponding CO/PBX line key to change the data option.
N
Press to write the data.
4
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-5-02 SMDR Print Format
1-5-14 Printer Line Feed Control Selection
1-5-23 Outgoing Mode Selection
1-5-25 SMDR Valid Call Timer Assignment
1-8-35 COM Port Baud Rate Setting Assignment
1-8-36 COM Port Parity/Stop Bit Setting Assignment
N
1. Station Message Detail Recording (SMDR) cannot be used if this Memory Block is programmed for No.
2. When PC is assigned, the SMDR output data can be saved in a Comma-Separated Values (CSV) format file on a PC.
The file can then be opened using PC software (i.e., MS Excel) to analyze, filter, and/or sort the data.
DRAFT 3
192 – Chapter 1
Setting
Title Data
N O
D I S P L A Y
LK 3 LK 4
Printer
The shaded area indicates
the default setting.
LK 7 LK 8
to access the Memory Block.
Memory Block Name
Printer Connected Selection, 1-5-13
NEC Business Solutions Ltd
1-5-13
System Mode
1
Submode
5
Data No.
13
PC Programming
+ AS