Automatic Day/Night Mode By Day Of Week Selection - NEC Xen IPK Programming Manual

December 2004
Automatic Day/Night Mode by
Day of Week Selection
General Description
Use this Memory Block to select either Pattern 1 or Pattern 2 Day/Night Mode start times for
each day of the week. Memory Block 1-1-27 Automatic Day/Night Mode Switching Time
Assignment sets Day/Night Mode start times for Pattern 1 and Pattern 2 to switch the system
between Day Mode and Night Mode.
Display
Data
No.
3 2 : D / N
T I M E
Settings
LK 1 LK 2
Sun Mon
LK 5 LK 6
Thu Fri
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 + CB
3 Press the corresponding CO/PBX line key to change the data option.
Each time a CO/PBX line is pressed, the LED indication changes from Pattern 1 to
Pattern 2.
CO/PBX
Line LED
Data
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-1-27 Automatic Day/Night Mode Switching Time Assignment
1-8-07 Class of Service (Attendant) Feature Selection 1
4-09 Telephone to Tenant Assignment
4-17 Station to Class of Service Feature Assignment
DRAFT 3
68 – Chapter 1
Title
B Y D A Y
D I S P L A Y
LK 3 LK 4
Tue Wed
There is no
default setting.
LK 7 LK 8
Sat
to access the Memory Block.
Off On
Day/Night Day/Night
Automatic Automatic
Switching Switching
Pattern 1 Pattern 2
Memory Block Name

Automatic Day/Night Mode by Day of Week Selection, 1-1-32

NEC Business Solutions Ltd
1-1-32
System Mode
1
Submode
1
Data No.
32
PC Programming
+ BM
Default Values
Sunday ~ Saturday = Pattern 1