NEC Xen IPK Programming Manual page 48

December 2004
LK 5 Trunk Group Mode
Data
Memory Block Name
No.
00 Digit Add/Del for Tie Line Networking
01 Tie Line Networking Tandem Connection
Assignment
02 8-Digit Matching Table to Trunk Group
Assignment
03 OCC Table to Trunk Group Assignment
04 LCR Class to Trunk Group Selection
05 Common Signalling Channel Route
Assignment
06 Trunk Group Outgoing Priority Selection
LK 6 Copy Mode
Data
Memory Block Name
No.
2 Tenant Mode Copy Assignment
3 CO Line Mode Copy Assignment
4 Telephone Mode Copy Assignment
5 Trunk Group Mode Copy Assignment
LK 7 ETU Mode
Data
Memory Block Name
No.
1 Card Interface Slot Assignment
2 Telephone Type Assignment
3-00 MIF (ACD) Assignment
3-01 MIF (LCR) Assignment
3-02 MIF (SMDR) Assignment
3-03 MIF (UCD) Assignment
3-04 MIF (Caller ID) Assignment
28 – Chapter 1
Default Value
No Add and Delete = 000
All Trunk Groups = Yes
Enabled
Use All Tables
Default Value
N/A
N/A
N/A
N/A
Default Value
Refer to Card Interface Slot Assignment on page 1-501..
Telephone
No Assignment (00)
No Assignment (00)
No Assignment (00)
No Assignment (00)
No Assignment (00)
DRAFT 3
NEC Business Solutions Ltd
Programming Values
Delete up to two digits
Add up to two digits
On = Yes (Enabled)
Off = No (Disabled)
On = Use (Enabled)
Off = Not Used (Disabled)
On - Use (Enabled)
Off = Not Used (Disabled)
Programming Values
Tenant 00~47
Tenant 01~64
Tenant 01~120
Tenant 01~32
Programming Values
NON
Telephone
DSS Console
SLT Adapter
Digital Voice Mail
00~02 (MIFA PKG Assigned Port No.
00~02 (MIFM PKG Assigned Port No.
00~02 (MIFM PKG Assigned Port No.
00~02 (MIFM PKG Assigned Port No.
00~02 (MIFM PKG Assigned Port No.
Multiline Terminal Programming