Co/Pbx Ringing Variation Selection - NEC Xen IPK Programming Manual

December 2004
CO/PBX Ringing Variation
Selection
General Description
Use this Memory Block to specify a ringing tone (Low, Medium, or High) for each CO/PBX line.
Display
CO/PBX
No.
Data
(01~64)
No.
0 1 / 0 7 : D S T
T I M E
Settings
LK 1 LK 2
Medium (M) Low (L)
LK 5 LK 6
Programming Procedures
1 Go off-line.
N
2 Press LK3 + +
Press the corresponding CO/PBX line key to change the data option.
3
Note: Use the following when entering data:
R
to go to the next CO/PBX Line No.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-1-28 Distinctive Ringing by Telephone or CO Selection
N
1. This Memory Block is not applicable if Telephone is selected in Memory Block , 1-1-28 , Distinctive Ringing by
Telephone or CO Selection.
2. High, medium, or low ringing tone follows when transferring calls.
DRAFT 3
346 – Chapter 1
Setting
Title
Data
R I N G = M
D I S P L A Y
LK 3 LK 4
High (H)
The shaded area indicates
the default setting.
LK 7 LK 8
to access the Memory Block.
KG
Memory Block Name

CO/PBX Ringing Variation Selection, 3-07

NEC Business Solutions Ltd
System Mode
3
Submode
—
Data No.
07
PC Programming
+ BCT
3-07