Call Forward-Busy Immediately/Delay Selection - NEC Xen IPK Programming Manual

December 2004
Call Forward-Busy
Immediately/Delay Selection
General Description
Use this Memory Block to specify immediate forward (No) or delay forward (Yes) for an Incoming
CO/PBX call if the station is set for Call Forward Busy.
Display
Tel Port No.
Data
(01~99)
No.
A0~C0
0 1 / 4 2 : B U S Y F W D
T I M E
Settings
LK 1 LK 2
No Yes
LK 5 LK 6
Programming Procedures
1 Go off-line.
2 Press LK4 + to access the Memory Block.
DB
Press the corresponding CO/PBX line key to change data option.
3
Note: Use the following to change option:
R
to select next Tel Port No.
N
4 Press to write the data.
P
Press to go back on-line.
5
Related Programming
M.B. Number
1-2-22 Call Forward No Answer Timer Selection
N
Telephone ports A0~C0 are ports 100~120.
DRAFT 3
448 – Chapter 1
Setting
Title Data
N O
D I S P L A Y
LK 3 LK 4
The shaded area indicates
the default setting.
LK 7 LK 8
Memory Block Name

Call Forward-Busy Immediately/Delay Selection, 4-42

NEC Business Solutions Ltd
4-42
System Mode
4
Submode
—
Data No.
42
PC Programming
+ BTT