Delayed Ringing - NEC Xen IPK Programming Manual

December 2004
Delay Announcement
Menu Access
Keyboard Shortcut
+BA
+AR
+AR
+AR
+AR
+AR
+AR
+AR
+AR
Note 1: To record the Delay Announcements:
First Announcement – Dial Access Code
(Access Codes are set in Memory Blocks 1-1-46, 1-1-47, or 1-1-48)
Second Announcement – Dial Access Code
(Access Codes are set in Memory Blocks 1-1-46, 1-1-47, or 1-1-48)
Note 2: Requires an MIFA-U( ) ETU or MIFM-U( ) ETU before the Memory Block can be programmed.
Note 3: Incoming analogue trunks must provide Reversal On Idle and Reversal On Answer signalling for correct
logging of abandoned calls.

Delayed Ringing

Menu Access
Keyboard Shortcut
+BCM
+BI
+BTT
+BTT
+BTM
+BTM
+BTM
DRAFT 3
566 – Chapter 2
System Data Name
Access Code (1-, 2-, 3-Digit) Assignment
First Delay Announcement Start Time Selection
First Delay Announcement Repeat Selection
First to Second Delay Announcement Interval Time Selection
Second Delay Announcement Repeat Selection
Second Delay Announcement Repeat Interval Time Selection
VRS Message Recording Time Selection
VRS Message Function Assignment
Delay Announcement Assignment
Dial
Dial
System Data Name
Delayed Ringing Timer Assignment (CO)
Delayed Ringing Timer Assignment (ICM)
CO/PBX Ring Assignment (Day Mode)
CO/PBX Ring Assignment (Night Mode)
Line Selection for Telephone Mode
Extension Line Key Ring Assignment (Day Mode)
Extension Line Key Ring Assignment (Night Mode)
Dial Dial
A C A
Dial Dial
A C
Section 2, Programming Guide Tables
NEC Business Solutions Ltd
Memory Block
1-1-46/47/48
(Item 501)
1-1-71
1-1-72
1-1-73
1-1-74
1-1-75
1-8-12
1-8-13
3-41
B
Memory Block
1-1-77
1-2-26
4-01
4-02
4-12
4-37
4-38