Line Key Selection - NEC Xen IPK Programming Manual

Xen IPK

Line Key Selection

General Description
Use this Memory Block to allow the technician to specify either of two line key assignment modes
for each tenant. The choices are Tenant-Wide Mode or Telephone Mode.
Display
Tenant
No. Data
(00~47) No.
0 0 / 0 5 : M O D E
T I M E
Settings
LK 1 LK 2
Tenant-
Telephone
Wide
Mode
Mode
LK 5 LK 6
Programming Procedures
Go off-line.
1
2 Press LK2 + KE to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
2-06 Line Key Selection for Tenant Mode
4-12 Line Key Selection for Telephone Mode
N
1. Mixed use of Tenant-Wide Mode and Telephone Mode in the system is permitted.
2. Tenant-Wide Mode:
Memory Block 2-06 Line Key Selection for Tenant Mode permits assignment of any desired feature to each of the
CO/PBX line keys. All the telephones in a tenant are assigned the same features.
3. Telephone Mode:
Memory Block 4-12 Line Key Selection for Telephone Mode permits assignment of any feature to each of the CO/
PBX line keys. Each telephone can be assigned different features.
2-05, Line Key Selection
Setting
Title
Data
T E L
D I S P L A Y
LK 3 LK 4
The shaded area indicates
the default setting.
LK 7 LK 8
Memory Block Name
Programming Manual
System Mode
2
Submode
—
Data No.
05
PC Programming
+ BN
DRAFT 3
Chapter 1 – 331
2-05