NEC Xen IPK Programming Manual page 631

Xen IPK
Section 7, Xen IPK Pulldown Menus
CO/PBX Trunks
This option allows technicians to program system data related to
trunk assignments.
Three selections are available with this option:
System Wide
Trunk Base
Timers
Intercom
This option allows the technician to program system data related to
intercom assignments
DISA
This option allows the technician to assign codes for Direct Inward
System Access (DISA).
Paging
This option allows data related to paging assignments to be
programmed.
Access Codes
This option allows the technician to enter Access Codes. Where
appropriate, Access Codes are set to default system values.
Speed Dialling
This option allows data related to system and station speed dialling
to be programmed.
System Timers
This option allows system-wide timers to be assigned.
Tenants
This option allows data related to tenant assignments to be
programmed.
Call Arrival Keys
This option allows Call Arrival block assignments to be programmed.
Forced Account Codes
This option allows the technician to program the account code
length and to assign account codes.
Programming Manual
DRAFT 3
Chapter 3 – 611