NEC Xen IPK Programming Manual page 148

December 2004
Programming Procedures (Continued)
3 Use the dial pad to enter the time required.
Note: J to move cursor left.
L to move cursor right.
Setting Data (Allow): Class 1 to Class 4: 000 to 255 sec
N
Press to write the data.
4
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-7-06 External Paging Timeout Selection
4-90 Internal Zone Paging Selection
4-71 Time Class Assignment for Telephone Mode (R2000 and above)
N
The six types of paging are:
All Internal Zone (51)
Internal Zone Paging (52~54)
External Zone Paging (all speakers) (55)
External Zone Paging (individual speakers) (56~58)
Internal/External Zone Paging (59)
DRAFT 3
128 – Chapter 1
000 = No Limit
NOTE: CCIS Network Class 1 is used.
Default values:
Class 1 to Class 4 = 10 secs
Memory Block Name
Internal Paging Timeout Selection, 1-2-00
NEC Business Solutions Ltd