Vrs Message Recording Time Selection - NEC Xen IPK Programming Manual

December 2004
VRS Message Recording
Time Selection
General Description
Use this Memory Block to specify the length and number of messages for each of the eight Voice
Recording Service (VRS) channels.
Display
Data
No.
Title
1 2 : V R S 1
T I M E
Settings
LK 1 LK 2
Recording Recording
Time Time
15 sec. 30 sec.
16 messages 8 messages
LK 5 LK 6
Programming Procedures
1 Go off-line.
Press LK1 + LK8 +
2 AB
Press corresponding CO/PBX line key to change data option.
3
Note: Use the following to enter VRS Channel:
K ~ H to enter numeric data
N
Press to write the data and advance to the next VRS Channel.
4
5 After entering last data, press
P
6 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
Voice Recording Services Channel 1 has 240 seconds for message recording. The number of messages that can be
recorded depends on message length. Divide 240 by the message length to obtain number.
DRAFT 3
232 – Chapter 1
VRS Setting
Chan. Data
1 5 s x 1 6
D I S P L A Y
LK 3 LK 4
Recording Recording
Time Time
60 sec. 120 sec.
4 messages 2 messages
LK 7 LK 8
to access the Memory Block.
N
to write the data.
The shaded area indicates
the default setting.

VRS Message Recording Time Selection, 1-8-12

NEC Business Solutions Ltd
1-8-12
System Mode
1
Submode
8
Data No.
12
PC Programming
+ AR
Default Values
All VRS Channels
Recording Time = 15 seconds,
16 messages