External Speaker Chime Selection - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________
1-7-08

External Speaker Chime Selection

General Description
Use this Memory Block to specify whether a normal paging alert tone (4 tones) sounds
before the speech path is established, a chime sounds at the start of the call, or a
chime sounds at the start and end of the call.
Display
D a t a
N o .
0 8 : S P K
T I M E
Settings
LK 1 LK 2
PRT C-S
PRT = Normal Paging Tone Before the Page
C-S = Chime - Start Only (4 Tone Chime)
C-B = Chime - Both Start and End (4 Tone Chime)
Programming Procedures
1 Go off-line.
K H
2 Press LK1 + LK7+
3 Press the corresponding CO/PBX line key to change the data option.
G
4 Press to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
1-7-03 External Page Alert Tone Selection
1-7-09 External Speaker Chime Start Time Selection
Memory Block 1-7-03 (External Paging Alert Zone Selection) must be enabled for this Memory Block to function.
___________________________________________________________________________________
2 - 204
S e t t i n g
T i t l e
D a t a
O N P R T
D I S P L A Y
LK 3 LK 4 LK 5
C-B
to access the Memory Block.
E
to go back on-line.
LK 6 LK 7
Notes
Electra Elite IPK
System Mode
1
Submode
7
Data No.
08
PC Programming
+BP
LK 8 The shaded
selection is the
default.
Memory Blocks