NEC Xen IPK Programming Manual page 321

Xen IPK
Related Programming (Continued)
M.B. Number
1-15-17 Centralised BLF Send Time Assignment
1-15-18 Centralised BLF Display Extension Number Assignment
3-70 CIC Number Assignment
5-05 Common Signalling Channel Route Selection
1-1-05 Start Time Selection
1-5-02 SMDR Print Format
1-5-13 Printer Connected Selection
1-5-14 Printer Line Feed Control Selection
1-5-25 SMDR Valid Call Time Assignment
1-5-26 SMDR Incoming/Outgoing Print Selection
1-8-35 COM Port Baud Rate Setting Assignment
4-56 SMDR Telephone Print Selection
N
1. This Memory Block is required for the following K-CCIS features:
• Centralised Billing - K-CCIS
• Centralised Day/Night Mode Change - K-CCIS
• Centralised BLF (K-CCIS)
2. Assigning a CCH i channel is used for IP (K-CCIS) feature.
1-15-05, Destination Point Code Transfer Assignment
Memory Block Name
Programming Manual
DRAFT 3
Chapter 1 – 301