Ps Out Of Area Tone Selection - NEC Xen IPK Programming Manual

December 2004

PS Out of Area Tone Selection

General Description
Use this Memory Block to specify whether a call to a PS Handset which is currently out of
coverage area will receive Busy Tone (BT) or Ring Back Tone (RBT).
Display
Data
No.
2 8 : P S
T I M E
Settings
LK 1 LK 2
BT RBT
LK 5 LK 6
Programming Procedures
Go off-line.
1
Press LK1 + LK2 +
2 BH
3 Press the corresponding CO/PBX line key to change the data option.
N
4 Press to write data.
P
5 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
Ring Back Tone is the ringing tone head by the caller.
Refer to the Features and Specifications Manual, feature M6 - Multi-zone Digital Cordless for instructions with VM when
PHS phone is set to CFBNA and turn off or out of area.
DRAFT 3
150 – Chapter 1
Setting
Title Data
T O N E = B T
D I S P L A Y
LK 3 LK 4
The shaded area indicates
the default setting.
LK 7 LK 8
to access the Memory Block.
NEC Business Solutions Ltd
1-2-28
System Mode
Submode
Data No.
PC Programming
PS Out of Area Tone Selection, 1-2-28
1
2
28
+AP