Barge-In Alert Tone Assignment - NEC Xen IPK Programming Manual

Xen IPK
Barge-In Alert Tone
Assignment
General Description
Use this Memory Block to assign the delayed ringing timer for incoming outside line calls.
Applicable to IPK R2000 and above.
Display
Data
No.
7 6 : A L E R T
T I M E
Settings
LK 1 LK 2
YS NO
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 +
GF
3 Press the corresponding CO/PBX line key to change the data option.
N
Press to write the data and display the next Memory Block.
4
5 Program the next Memory Block or press
Related Programming
M.B. Number
1-8-08 Class of Service (Station) Feature Selection 2
4-17 Station to Class of Service Feature Assignment
4-90 SLT Data Line Security Assignment
N
1. Monitoring telephone conversations may be illegal under certain circumstances and laws. Consult a legal advisor
before implementing the monitor of conversations. Some federal and state laws require a monitoring party to use an
alert tone to indicate monitoring and/or obtain consent from all parties to the conversation. Some laws provide strict
penalties for illegal monitoring of telephone conversations.
2. When YS is assigned, both internal and external parties receive the alert tone.

1-1-76, Barge-In Alert Tone Assignment

Setting
Title Data
T O N E = Y S
D I S P L A Y
LK 3 LK 4 LK5
to access the Memory Block.
P
to go back on-line.
LK6 LK7
Default Values
15 Seconds
Memory Block Name
Programming Manual
1-1-76
System Mode
1
Submode
1
Data No.
76
PC Programming
+ BTS
LK8
The shaded area indicates
the default setting.
DRAFT 3
Chapter 1 – 117