NEC Xen IPK Programming Manual page 66

December 2004
Programming Procedures
3 Use the dial pad to enter the time required.
Note: J to move cursor left.
L to move cursor right.
Setting Data (Allow): Class 1 to Class 4: 000 to 999
sec
Limit
N
Press to write the data.
4
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-1-11 System Transfer/Camp-On Selection
1-6-05 Attendant Add-On Console Key Selection
1-8-08 Class of Service (Station) Feature Selection 2
1-1-64 Attendant Add-On Console Transfer/Camp-On Recall Timer Selection
4-71 Time Class Assignment for Telephone Mode (R2000 and above)
N
When a station with an Attendant Add-On Console assigned to it transfers or camps on a call and the call goes
unanswered, the call recalls using Memory Block 1-1-64 Attendant Add-On Console Transfer/Camp-On Recall Timer
Selection.
DRAFT 3
46 – Chapter 1
(Continued)
000 = No
Default values:
Class 1 to Class 4 = 060 secs
Memory Block Name
Station Transfer/Camp-On Recall Timer Selection, 1-1-12
NEC Business Solutions Ltd