Change Password - NEC Xen IPK Programming Manual

December 2004
DRAFT 3
608 – Chapter 3
Wizard
Accesses the Wizard. Wizard is available for every feature offered
in the Xen system. Wizard provides all of the information necessary
to program a feature. All of the system data items necessary for
programming the feature are grouped together. The user can press
the appropriate tabs to access system data and make the
necessary changes.
This option is only available when a configuration file is open.

Change Password

Allows the user to change the MAT password.
Print
Provides two print options: Job Specifications and Designation
Labels (requires a standard inkjet or laser printer).
When Job Specifications is selected, a menu is displayed. There
are three options for printing the Job Specifications: printing a
family (group) such as system-wide, trunk group, or tenant, printing
a range of Memory Blocks, or printing an individual Memory Block.
When Designation Labels is selected, MAT automatically opens the
DESI for Windows label printing application. The current telephone
information is automatically exported to DESI. Labels can then be
configured and printed for the telephones. This requires the NEC
LASER Labels for printing on InkJet or Laser printers.
Note:
For the Designation Labels option to be enabled, the DESI
for Windows application must be installed on your computer.
Installation is usually done during the installation of MAT.
Print Setup
Allows access to the printer setup screen. This allows the printer
configuration to be modified.
Recent File
Displays the last two files that were opened. These are listed as 1
and 2. The user can select either file to open. This option is only
available when New or Open is selected.
Exit
Exits the programming software. If changes have not been saved,
the technician is prompted to save the changes before the program
shuts down.
NEC Business Solutions Ltd
Section 7, Xen IPK Pulldown Menus