Route Advance Block Assignment - NEC Xen IPK Programming Manual

December 2004
Route Advance Block
Assignment
General Description
Use this Memory Block to assign priority levels (1~4) to each Trunk Group assigned in a Route
Advance Block. The system has 32 blocks that can be specified.
Display
Data
No.
3 0 : R T
T I M E
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 + CK
3 Enter the data using the dial pad.
Note: Use the following to enter data:
J
to move the cursor left
L to move the cursor right
K I
~ to enter numeric data
N
4 Press to write the data. Data for the Priority Nos. 2~4 are displayed in succession.
5 After entering the data for Priority No. 4, press
6 After entering data for Block No. 32, press
P
7 Press to go back on-line.
Related Programming
M.B. Number
3-03 Trunk-to-Trunk Group Assignment
DRAFT 3
66 – Chapter 1
Block Priority
Setting
No. No.
Data
(1~16) (1~4)
Title
A D V 0 1 - 1 = 0 0
D I S P L A Y
to access the Memory Block.
Block No. Priority No.
1
32
N
N
Setting Data
1 Trunk Groups 01~32
2 Trunk Groups 01~32
3 Trunk Groups 01~32
4 Trunk Groups 01~32
1 Trunk Groups 01~32
2 Trunk Groups 01~32
3 Trunk Groups 01~32
4 Trunk Groups 01~32
to write the data. Data for Priority 1 for the next Block No. is displayed.
to write the data. The next Memory Block is displayed.
Memory Block Name
NEC Business Solutions Ltd
1-1-30
System Mode
PC Programming
Default Values
All Blocks (00)

Route Advance Block Assignment, 1-1-30

1
Submode
1
Data No.
30
+ BCS