Universal Night Answer Over External Speaker - NEC Xen Topaz Programming Manual

IN
SA
SB COPY
Description
Use Program 31-05 : Universal Night Answer over External Speaker to assign Universal Night Answer
ringing to each External Paging zone. For each trunk port (1-51), you make a separate entry for each Exter-
nal Paging zone (1-6). When programming, the zones on the PGDU are numbers 1-6.
For Incoming Ring Tone Audible on External Speaker, you make a separate entry for each Night Service
mode.
Input Data
Trunk Port No. External Speaker No.
1-51
Conditions
Speakers 1 ~ 6 apply to 2 PGDU card.
Speaker 7 is the in-built part on 308M.
Feature Cross Reference
♦
Paging, External
♦
Night Service
Telephone Programming Instructions
To enter data for Program 31-05 (Universal Night Answer):
1. Enter the programming mode.
2. Enter 31 05
31-05-01 Trunk1
Spkr1 Mode1 = 0
3. Enter the number of the item you want to program.
31-05-xx
xxxxx
4. Select the Trunk number to be Programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
Xen Topaz Programming Manual
P 31: E
ROGRAM
31-05: U
NIVERSAL
1-7
246
S
XTERNAL PEAKER AND
N A
IGHT NSWER OVER
Day/Night Mode
0 : No Ringing
1-8
1 : Ringing
Program 26 to 35
I
NTERNAL
E S
XTERNAL
Input Data
Default
P
AGING
PEAKER
0