Symptom:
*AIRBAG INDICATOR ON WITHOUT ACM TROUBLE CODES
AIRBAG INDICATOR ON WITHOUT ACM TROUBLE CODES
INSTRUMENT CLUSTER PROBLEMS
TEST
1
Turn the ignition on.
Make sure that all active DTC's have been repaired before performing this procedure.
With the DRBIII select PASSIVE RESTRAINTS, AIRBAG, MONITOR DISPLAY,
WARNING LAMP STATUS and read the WARNING LAMP STATUS.
Does the DRBIII show LAMP REQ BY ACM: ON?
Yes → WARNING: MAKE SURE THE BATTERY IS DISCONNECTED,
→ Refer to INSTRUMENT CLUSTER CATEGORY symptom list for
No
NOTE: When reconnecting Airbag system components, the ignition must be
turned off and the battery must be disconnected.
POSSIBLE CAUSES
ACTION
THEN WAIT TWO MINUTES BEFORE PROCEEDING. Replace
the Airbag Control Module in accordance with Service Instruc-
tions.
Perform AIRBAG VERIFICATION TEST - VER 1.
problems related to Instrument Cluster.
Perform AIRBAG VERIFICATION TEST - VER 1.
93
AIRBAG
APPLICABILITY
All