Solenoid Valves (Shift Solenoid Valves And Tcc Solenoid Valve) Inspection - Suzuki 2006 SX4 Service Manual

5A-78 Automatic Transmission/Transaxle:
6) Clean mating surface transaxle case.
7) Apply sealant to mating surface of transaxle side
cover and transaxle case by using a nozzle (1) as
shown in figure by such amount that its section is 1.5
mm (0.059 in) in diameter.
"A": Sealant 99000–31230 (SUZUKI Bond
No.1216B)
8) Install new transaxle side cover (1) by tightening new
®
torx bolts to specified torque.
Tightening torque
Transaxle side cover bolts (a): 13 N·m (1.3 kgf-
m, 9.40 lb-ft)
1
(a)
9) Pour A/T fluid referring to "A/T Fluid Change".
10) Verify that there is no A/T fluid leakage.
"A"
1
I4RH01510045-01
(a)
(a)
(a)
I4RH01510046-01
Solenoid Valves (Shift Solenoid Valves and TCC
Solenoid Valve) Inspection
Resistance Check
Shift solenoid valve-A (No. 1), -B (No. 2) and TCC
solenoid valve
Shift solenoid valve-A resistance
Standard: 12 – 16 Ω at 20 °C (68 °F)
Shift solenoid valve-B resistance
Standard: 11 – 15 Ω at 20 °C (68 °F)
TCC solenoid valve resistance
Standard: 11 – 15 Ω at 20 °C (68 °F)
S6RW0C5106022
I2RH01510068-01