Suzuki 2006 SX4 Service Manual page 601

Non-Euro-OBD Model
1. Shift Point in "D", "3" and/or "2" range
Throttle
opening (%)
Over 90%
UP shift
Over 90%
DOWN shift
2. Lock-up point in "D" and/or "3" range
Lock-up
clutch status
3rd gear lock-up
4th gear lock-up
NOTE
The gear change is done at the shift point different from the above while any of the following control
functions is working. Bear this in mind when performing inspection.
• Slope Shift Control
When the AT controller makes up-slope judgment, Slope Shift Control (on up-slope) is executed by
changing the gear change point to the high-speed side so as to reduce frequent up-shift and
downshift operations.
• Cruise Shift Control
Cruise Shift Control is executed by selecting appropriate gear according to requirement for
retaining a constant vehicle speed or acceleration so as to reduce frequent up-shift and down-shift
operations while cruising.
Shift
1st → 2nd
2nd → 3rd
3rd → 4th
1st → 2nd
2nd → 3rd
50%
3rd → 4th
1st → 2nd
2nd → 3rd
10%
3rd → 4th
4th → 3rd
3rd → 2nd
2nd → 1st
4th → 3rd
3rd → 2nd
50%
2nd → 1st
4th → 3rd
3rd → 2nd
0%
2nd → 1st
Throttle
opening (%)
Over 80%
ON
50%
Over 85%
OFF
50%
Over 80%
ON
50%
Over 85%
OFF
50%
Automatic Transmission/Transaxle:
Vehicle speed km/h (mph)
57 – 62 (35 – 39)
112 – 117 (70 – 73)
173 – 178 (108 – 111)
30 – 35 (19 – 22)
48 – 53 (30 – 33)
71 – 76 (44 – 47)
14 – 19 (9 – 12)
25 – 30 (16 – 19)
40 – 45 (25 – 28)
162 – 167 (101 – 104)
107 – 112 (66 – 70)
42 – 48 (26 – 30)
63 – 68 (39 – 42)
25 – 30 (16 – 19)
8 – 13 (5 – 8)
23 – 28 (14 – 17)
8 – 13 (5 – 8)
8 – 13 (5 – 8)
Vehicle speed km/h (mph)
148 – 153 (92 – 95)
71 – 76 (44 – 47)
123 – 128 (76 – 80)
53 – 58 (33 – 36)
168 – 173 (104 – 108)
71 – 76 (44 – 47)
157 – 162 (98 – 101)
67 – 72 (42 – 45)
Remark
With applying brake pedal (coast
down condition)
Remark
3 range only
5A-13