1St Timing Chain And Chain Tensioner Inspection - Suzuki 2006 SX4 Service Manual

1D-29 Engine Mechanical:
11) Apply engine oil to sliding surface of timing chain
guide No.1 (1) and then install it.
Tighten guide bolts to specified torque.
Tightening torque
Timing chain guide No.1 bolt (a): 9 N·m (0.9 kgf-
m, 6.5 lb-ft)
12) Check that dark blue and gold plates of 1st timing
chain are in match with match marks on sprockets
respectively.
1. Match mark on idler sprocket
2. Dark blue plate
3. Match mark on crankshaft timing sprocket
4. Gold plate
13) Install 2nd timing chain. Refer to "2nd Timing Chain
and Chain Tensioner Removal and Installation" for
installation.
14) Install timing chain cover. Refer to "Timing Chain
Cover Removal and Installation" for installation.
15) Install cylinder head cover. Refer to "Cylinder Head
Cover Removal and Installation" for installation.
16) Install oil pan. Refer to "Oil Pan and Oil Pump
Strainer Removal and Installation in Section 1E" for
installation.
17) Install engine assembly to vehicle referring to
"Engine Assembly Removal and Installation".
1st Timing Chain and Chain Tensioner
Inspection
Timing Chain Guide No.1
Check shoe for wear or damage.
1. Timing chain guide No.1
I2RH01140089-01
Timing Chain Tensioner
Check shoe (1) for wear or damage.
Crankshaft Timing Sprocket
Check teeth of sprocket for wear or damage.
I2RH01140090-01
S6RW0C1406023
I2RH01140091-01
I2RH01140092-01
I2RH01140093-01