1St / Reverse Brake And One-Way No. 2 Clutch Operation Check; 1St / Reverse Brake And One-Way No. 2 Clutch Disassembly And Reassembly - Suzuki 2006 SX4 Service Manual

5A-112 Automatic Transmission/Transaxle:
1st / Reverse Brake and One-Way No. 2 Clutch
Operation Check
One-Way No. 2 Clutch
1) Check that one-way No. 2 clutch (1) turns freely
when turned counterclockwise [A] and looks when
turned clockwise [B].
[A]
1st / Reverse Brake and One-Way No. 2 Clutch
Disassembly and Reassembly
Disassembly
1) Remove one-way No. 2 clutch inner race (1).
2) Remove snap ring (1), using flat end rod or the like.
3) Remove one-way No. 2 clutch (2) and front planetary
ring gear thrust washer (3).
1
2
3
4) Remove snap ring (1), using pliers or the like.
5) Remove front planetary ring gear flange (2) from
S6RW0C5106045
[B]
1
6) Remove O-rings (1) from 1st / reverse brake piston
I4RH01510130-01
S6RW0C5106046
1
Reassembly
1) Apply A/T fluid to new O-rings and install new O-
I4RH01510131-01
2
1
2) Install front planetary ring gear flange (1) on to front
3) Install snap ring (3), using pliers or the like.
3
I4RH01510132-01
front planetary ring gear (3).
(2).
rings (1) to 1st / reverse brake piston (2).
planetary ring gear (2).
1
2
3
I4RH01510133-01
2
1
1
I4RH01510134-01
2
1
1
I4RH01510134-01
3
1
2
I4RH01510135-01