Suzuki 2006 SX4 Service Manual page 328

1G-7 Fuel System:
Clamp other than around fuel tank
[A]: With short pipe, fit hose as far as it reaches pipe joint as shown.
[B]: With the following type pipe, fit hose as far as its peripheral projection
as shown.
[C]: With bent pipe, fit hose as its bent part as shown or till depth "b".
[D]: With straight pipe, fit hose till depth "b".
[E]: With red marked pipe, fit hose end reaches red mark on pipe.
"a": Clamp securely at a position 3 – 7 mm (0.12 – 0.27 in.) from hose end.
"b": 20 – 30 mm (0.79 – 1.18 in.)
"c": 0 – 5 mm (0 – 0.19 in.)
4. Red mark
Quick Joint
Disconnecting
1) Remove mud, dust and/or foreign material between
pipe (1) and quick joint (2) by blowing compressed
air.
2) Unlock joint lock by inserting special tool between
pipe and quick joint.
Special tool
(A): 09919–47020
3) Disconnect quick joint from pipe.
Reconnecting
Insert quick joint to fuel pipe until they lock securely (a
click is heard), and confirm that quick joint is not
disconnected by hand.
I7RW01170007-01
1
2
(A)
2
1
I4RS0A170019-01