Suzuki 2006 SX4 Service Manual page 295

Crankshaft Position Sensor Plate
Check teeth of plate for damage.
If any damage is found, replace crankshaft (1).
2. Crankshaft position sensor plate
Oil Pump Sprocket
Check teeth of sprocket for wear or damage.
If any damage or wear is found, replace crankshaft (1).
2. Oil pump sprocket
Oil Pump Chain
Check oil pump chain for wear or damage.
Flywheel
• If ring gear is damaged, cracked or worn, replace
flywheel.
• If the surface contacting clutch disc is damaged, or
excessively worn, replace flywheel.
• Check flywheel for face runout with a dial gauge.
If runout exceeds its limit, replace flywheel.
Limit on runout
0.2 mm (0.0078 in.)
I2RH01140194-01
Cylinder Block
• Distortion of gasketed surface.
• Using straightedge and thickness gauge, check
gasketed surface for distortion and, if flatness
exceeds its limit, correct It.
Flatness Limit
0.06 mm (0.0024 in.)
I2RH01140195-01
I2RH01140196-01
Engine Mechanical: 1D-64
I2RH01140198-01
I2RH01140199-01