Suzuki 2006 SX4 Service Manual page 1057

– Check connector or lead wire of SDM for scorching,
melting or damage.
– Check SDM connector and terminals for tightness.
– Check if SDM sets a DTC and is judged as
malfunctioning according to the diagnostic flow.
• Air bag wire harness and connections
– Check for damages, deformities or poor
connections.
Refer to "Inspection of Intermittent and Poor
Connections".
– Check wire harness clamps for tightness.
7
4
1
3
5
1. Main harness
2. Grounding point
3. Floor harness
4. Instrument panel harness
• Forward impact-sensor
– Check sensor (1) and apron-side-member (driver
side) (2) for damage, bend or rust.
– Check connector (3) or lead wire (4) of forward-
sensor for scorching, melting or damage.
1
2
I5RH01820092-01
2
I6RW0C820018-01
5. Side-air bag harness
6. Side curtain-air bag harness
7. Side curtain-air bag (inflator)
module
3
4
I5RW0A820059-01
• Side impact-sensor
– Check sensor (1) and under body (2) for dents,
cracks, deformation or rust.
– Check sensor connector (sensor side and harness
side) (3) or sensor lead wire (4) for damage, crack,
scorching or melting.
2
4
• Seat belt pretensioner
– Check for dents, cracks, damage or fitness
– Check harness and connector for damage or
tightness.
6
1. Seat belt
• Seat belts and mounting points
– Refer to "Front Seat Belt Components in Section
8A".
• "AIR BAG" warning light
– After vehicle is completely repaired, perform "Air
Bag Diagnostic System Check".
• Side-air bag (inflator) module
– Check for dents, cracks, damage or fitness.
– Check trim cover for cracks or deformities.
– Check wire harness and connector for damage or
tightness.
• Side curtain-air bag (inflator) module
– Check for dents, cracks, damage or fitness.
– Check harness wire harness and connector for
damage or tightness.
– Check headlining for cracks or deformation.
Air Bag System:
1
3
I5RW0A820060-01
I3JA01820043-01
2. Retractor assembly
8B-92