General Description - Suzuki 2006 SX4 Service Manual

Hide thumbs Also See for 2006 SX4:

Service manual (1556 pages)

Table of Contents

5A-2 Automatic Transmission/Transaxle:

Part Inspection and Correction Table

Casted part, machined part

Bushing, thrust washer

Oil seal, gasket

Splined part

Friction plate

Separator plate, retaining plate

Sealing surface (where lip

A/T Description

This automatic transaxle is a full automatic type with 4-speed.

The torque converter is a 3-element, 1-step and 2-phase type and is equipped with an electronically controlled lock-up

mechanism. The gear shift device consists of 3 sets of planetary gear units, 3 disc type clutches, 3 disc type brakes, a

band type brake and 3 one-way clutches. The gear shift is done by selecting one of 7 positions ("P", "R", "N", "D", "3",

"2" and "L") by means of the select lever installed on the floor.

Small flaw, burr

Deep or grooved flaw

Clogged fluid passage

Flaw on installing surface, residual gasket

Unsmooth rotation

Streak, pitting, flaw, crack

Flaw, burr, wear, burning

Flawed or hardened seal ring

Worn seal ring on its periphery or side

Piston seal ring, oil seal, gasket, etc.

Worn gear tooth

Burr, flaw, torsion

Wear, flaw, distortion

No interference

Settling, sign of burning

Wear, burning, distortion, damaged claw

Flaw, rough surface, stepped wear, foreign