Suzuki 2006 SX4 Service Manual page 611

DTC No. Trouble area
Transmission Fluid
P0712 Temperature Sensor "A"
Circuit Low
Transmission Fluid
P0713 Temperature Sensor "A"
Circuit High
Input Speed Sensor "A"
P0717
Circuit No Signal
Output Speed Sensor Circuit
P0722
No Signal
Pressure Control Solenoid
P0961 "A" Control Circuit Range/
Performance
Pressure Control Solenoid
P0962
"A" Control Circuit Low
Pressure Control Solenoid
P0963
"A" Control Circuit High
Shift Solenoid "A" Control
P0973
Circuit Low
Shift Solenoid "A" Control
P0974
Circuit High
Shift Solenoid "B" Control
P0976
Circuit Low
Shift Solenoid "B" Control
P0977
Circuit High
Internal control module
P1702
memory check sum error
Torque Converter Clutch
P2763 Pressure Control Solenoid
Control Circuit High
Torque Converter Clutch
P2764 Pressure Control Solenoid
Control Circuit Low
Control Module
U0073
Communication Bus Off
TCM assumes transmission fluid temperature to be 200 °C (392 °F) and
controls transaxle.
Line pressure is controlled to maximum pressure, lock-up function is
inhibited and gear position is fixed according to select lever position as
follows.
• D range: Fixed to 4th gear position
• 3 range: Fixed to 4th gear position
• 2 range: Fixed to 3rd gear position
• L range: Fixed to 1st gear position
Line pressure is controlled to maximum pressure, lock-up function is
inhibited and gear position is fixed according to select lever position as
follows.
• D range: Fixed to 4th gear position
• 3 range: Fixed to 4th gear position
• 2 range: Fixed to 3rd gear position
• L range: Fixed to 1st gear position
TCM is controlled as follows.
• Gear position is fixed in 1st gear when vehicle speed is 10 km/h (6
mile/h) or less.
• Up shifting to 4th gear is inhibited when transmission fluid temperature
is 150 °C (302 °F) or more.
TCM is controlled as follows.
• Line pressure is controlled to maximum pressure.
• TCM assumes throttle position signal to be 0%.
• TCM assumes engine speed to be 0 RPM.
• After 15 minutes pass from detecting malfunction, TCM assumes
engine coolant temperature to be 90 °C (194 °F).
• Gear position is fixed according to select lever position as follows.
– D range: Fixed to 4th gear position
– 3 range: Fixed to 4th gear position
– 2 range: Fixed to 3rd gear position
– L range: Fixed to 1st gear position
Automatic Transmission/Transaxle:
Fail safe operation
5A-23