Suzuki 2006 SX4 Service Manual page 679

21) Loosen 11 bolts of transaxle rear cover.
22) Lightly and uniformly tap two rib sections of transaxle
rear cover (1), using plastic hammer.
23) Pull out transaxle rear cover (1) and input shaft rear
thrust bearing rear race (2).
1
24) Remove 4 gaskets (1) from transaxle case.
25) Remove tube clamp (2) and transaxle lubrication
tube (3) prying up both ends of the tube.
1
2
I5RH01510014-01
2
3
I4RH01510067-01
Automatic Transmission/Transaxle:
26) Remove forward and direct clutch assembly (1),
thrust bearing (2) and bearing front race (3) of input
shaft rear side.
2
3
27) Remove planetary gear (1) and planetary sun gear
(2) with the input shaft front thrust bearing (3)
installed.
28) Remove snap ring (1) using flat end rod or the like.
29) Remove front planetary ring gear and one-way No. 2
clutch (2) with front planetary ring gear rear thrust
bearing (3).
30) Remove retaining plates "R", friction plates "F" and
separator plates "S" in the following order.
R → F → S → F → S → F → S → F → S → F → R
1
2
3
5A-91
1
I4RH01510068-01
3
2
1
I4RH01510069-01
I4RH01510070-01