• When installing left oil seal (1) and right oil seal (2)
using special tool, use care so that oil seals in proper
direction and position as shown in figure.
Special tool
: 09925–15410
Distance
A/T model
"a": 0 – 1 mm (0 – 0.04 in.)
"b": 11 – 12 mm (0.43 – 0.47 in.)
M/T model
"a": 6 – 7 mm (0.24 – 0.35 in.)
"b": 2 – 3 mm (0.08 – 0.12 in.)
• Be sure to apply grease to oil seal lip and bearing side
space indicated in figure.
"A": Grease 99000–25011 (SUZUKI Super Grease
A)
Tightening Torque Specifications
Fastening part
Brake hose mounting bolt
NOTE
The specified tightening torque is also described in the following.
"Front Drive Shaft Assembly Components Location"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
[A]: A/T model
• Press-fit center shaft (1) from left oil seal (2) side.
[A]: A/T model
Specifications
Tightening torque
N⋅m
kgf-m
25
2.5
Drive Shaft / Axle: Front 3A-8
I7RW01311007-02
[B]: M/T model
I7RW01311008-03
[B]: M/T model
S6RW0C3117001
Note
lb-ft
18.0