Oil Pump, 2Nd Brake And 2Nd Coast Brake Inspection - Suzuki 2006 SX4 Service Manual

Oil Pump, 2nd Brake and 2nd Coast Brake
Inspection
1) Check body clearance of driven gear (1).
Push driven gear (2) to one side of oil pump body
(3). Using a feeler gauge, measure clearance
between driven gear (2) and body (3). If clearance
exceeds standard value, replace oil pump assembly.
Clearance between driven gear and body
Standard: 0.075 – 0.15 mm (0.00295 – 0.0059 in.)
Limit: 0.20 mm (0.0079 in.)
2) Check tip clearance of both drive and driven gears.
Measure radial clearance between gear tooth tip and
crescent (1). If clearance exceeds standard value,
replace oil pump assembly.
Clearance between drive gear and crescent
Standard: 0.004 – 0.248 mm (0.0001 – 0.010 in.)
Limit: 0.298 mm (0.0117 in.)
3) Check side clearance of both gears.
S6RW0C5106035
1
2
3
4) Measure inside diameter of oil pump body bushing,
I4RH01510109-01
1
I4RH01510110-01
Automatic Transmission/Transaxle:
Using a straightedge (1) and a feeler gauge,
measure side clearance between gears and pump
body.
If clearance exceeds standard value, replace oil
pump assembly.
Side clearance between gears and oil pump body
Standard: 0.03 – 0.05 mm (0.001 – 0.002 in.)
using special tools.
If inside diameter exceeds limit, replace oil pump
body.
Oil pump body bushing inside diameter limit:
38.18 mm (1.503 in.)
Special tool
(A): 09900–20607
(B): 09900–22403
NOTE
Perform measurement at several points.
5A-101
1
I4RH01510256-01
(A)
(B)
I4RH01510112-01