DTC Troubleshooting
Step
1
Was "Air Bag Diagnostic System Check Flow" performed?
2
Side-air bag circuit check
1) Remove applicable driver / passenger side-air bag
(inflator) module from seat back referring to "Side-Air
Bag (Inflator) Module Removal and Installation".
2) Check for proper connection to applicable side-air bag
(inflator) module at terminal in connector "Q104" or
"Q105".
3) If OK, then connect special tools (A), (B) and (C) to
applicable side-air bag (inflator) connector "Q104" or
"Q105".
Special tool
(A): 09932–76010
(B): 09932–75010
(C): 09932–78310
4) Check SDM for DTC.
With ignition switch turned ON, is DTC B1061 or B1065 still
indicated?
Action
"Q104", "Q105"
(A)
STEERING WHEEL
Yes
Go to Step 2.
Go to Step 3.
(C)
(B)
I7RW01822077-01
Air Bag System:
8B-56
No
Go to "Air Bag
Diagnostic System
Check Flow".
Replace side-air bag
(inflator) module
referring to "Side-Air
Bag (Inflator) Module
Removal and
Installation".