Suzuki 2006 SX4 Service Manual page 665

4) Remove solenoid harness from clamp.
5) Disconnect solenoid connectors (1).
1
6) Remove pressure control solenoid valve (2) after
removing bolt (1).
1
2
7) Remove TCC solenoid valve (1), shift solenoid
valve–B (No. 2) (2) and shift solenoid valve–A (No.
1) (3) by removing bolts.
3
1
Installation
1) Apply A/T fluid to new O-rings of solenoid valves and
pressure control solenoid.
2) Install new O-rings to each solenoid valves and
pressure control solenoid.
3) Install shift solenoid valve–A (No. 1) (1), shift
solenoid valve–B (No. 2) (2) and TCC solenoid valve
(3).
Tightening torque
Shift solenoid bolts (a): 7.0 N·m (0.7 kgf-m, 5.0
lb-ft)
1
4) Install pressure control solenoid (1).
I4RH01510039-01
Tightening torque
Pressure control solenoid bolt (a): 7.0 N·m (0.7
kgf-m, 5.0 lb-ft)
Valve body bolt (b): 10.0 N·m (1.0 kgf-m, 7.5 lb-
ft)
I4RH01510040-01
5) Connect solenoid connectors by identifying wire
color.
2
Solenoid coupler: Wire color
Pressure control solenoid valve (1): Blue +
Brown
Shift solenoid valve-A (No. 1) (2): White
Shift solenoid valve-B (No. 2) (3): Black
TCC solenoid valve (4): Yellow
I4RH01510041-01
Automatic Transmission/Transaxle:
1
(a)
3
(a)
1
(b)
2
1
4
5A-77
2
(a)
I4RH01510042-01
(a)
I4RH01510043-01
3
I4RH01510044-01