Pistons, Piston Rings, Connecting Rods And Cylinders Disassembly And Reassembly - Suzuki 2006 SX4 Service Manual

5) Install cylinder head. Refer to "Valves and Cylinder
Head Removal and Installation" for installation.
6) Install oil pan. Refer to "Oil Pan and Oil Pump
Strainer Removal and Installation in Section 1E" for
installation.
7) Install camshafts and tappets and shims. Refer to
"Camshafts, Tappet and Shim Removal and
Installation".
8) Install 1st timing chain. Refer to "1st Timing Chain
and Chain Tensioner Removal and Installation" for
installation.
9) Install 2nd timing chain. Refer to "2nd Timing Chain
and Chain Tensioner Removal and Installation" for
installation.
10) Install timing chain cover. Refer to "Timing Chain
Cover Removal and Installation" for installation.
11) Check intake and exhaust valve lashes referring to
"Valve Lash (Clearance) Inspection".
12) Install cylinder head cover referring to "Cylinder
Head Cover Removal and Installation".
13) Install engine assembly to vehicle referring to
"Engine Assembly Removal and Installation".
Pistons, Piston Rings, Connecting Rods and
Cylinders Disassembly and Reassembly
Disassembly
1) Using piston ring expander, remove two
compression rings (Top and 2nd) and oil ring from
piston.
2) Remove piston pin from connecting rod.
• Ease out piston pin circlips (1), as shown.
• Force piston pin out.
Engine Mechanical: 1D-46
S6RW0C1406035
I2RH01140151-01
I2RH01140152-01