Suzuki 2006 SX4 Service Manual page 248

1D-17 Engine Mechanical:
24) Remove engine right mounting (1), engine right
mounting No.1 bracket (2) and engine left mounting
bracket bolt and nuts(3).
1
3
25) Remove suspension frame mounting bolts (1) and
front lower cross member bolts (2).
26) Lower engine with transaxle, front suspension frame,
front lower cross member, transfer (4WD model) and
steering gear case.
CAUTION
!
Before lowering engine, in order to avoid
damage to A/C compressor, make clearance
by rising it.
27) Disconnect steering gear case from suspension
frame referring to "Steering Gear Case Assembly
Components in Section 6C", if necessary.
28) Disconnect transfer.
29) Disconnect transaxle from engine.
30) Remove clutch cover and clutch disk referring to
"Clutch Cover, Clutch Disc and Flywheel Removal
and Installation in Section 5C", if necessary (M/T
model).
Installation
1) Install clutch cover and clutch disk referring to
"Clutch Cover, Clutch Disc and Flywheel Removal
and Installation in Section 5C", if necessary (M/T
model).
2
2) Connect transaxle to engine referring to "Manual
Transaxle Unit Dismounting and Remounting in
Section 5B" or "Automatic Transaxle Unit
Dismounting and Remounting in Section 5A", if
removed.
3) Connect transfer to suspension frame referring to
"Transfer Dismounting and Remounting in Section
3C", if removed (4WD model).
4) Connect steering gear case to suspension frame
referring to "Steering Gear Case Assembly
Components in Section 6C", if removed.
5) Lift engine with transaxle, front suspension frame,
front lower cross member, transfer (4WD model) and
steering gear case into engine compartment with
jack.
!
Before lifting engine, in order to avoid
I7RW01140034-01
damage to A/C compressor, make clearance
by rising it.
6) Tighten suspension frame mounting bolts and front
lower cross member bolts, and then tighten bolts to
2
specified torque.
Tightening torque
Suspension frame mounting bolt (a): 150 N·m (
15.0 kgf-m, 108.5 lb-ft)
Front lower cross member bolt (b): 55 N·m (5.5
kgf-m, 40.0 lb-ft)
1
I5RW0A140014-01
CAUTION
2,(b)
1,(a)
I5RW0A140016-01