3" Position Switch Inspection; Shift Lock Solenoid Inspection; Shift Lock Solenoid Replacement - Suzuki 2006 SX4 Service Manual

"3" Position Switch Inspection

1) Remove console box referring to "Console Box
Components in Section 9H".
2) Disconnect "3" position switch connector (1).
3) Check continuity between "3" position switch
terminals.
If check result is not as satisfied, replace.
"3" position switch specification
Shift select lever to "3" or "2" range: Continuity
Shift other above range: No continuity
S6RW0C5106007
1
I7RW01510040-01
Automatic Transmission/Transaxle:

Shift Lock Solenoid Inspection

Check that shift lock solenoid rod (1) moves smoothly
when battery voltage is conducted and it moves back.
If solenoid rod does not move smoothly, replace.

Shift Lock Solenoid Replacement

1) Remove console box referring to "Console Box
Components in Section 9H".
2) Remove shift lock solenoid (1) using slotted
screwdriver or the like.
3) Install shift lock solenoid.
4) Install covers as they were.
5A-69
S6RW0C5106008
1
I7RW01510041-01
S6RW0C5106009
1
I7RW01510042-01