Seat Belts; Precautions On Service And Diagnosis Of Seat Belt - Suzuki 2006 SX4 Service Manual

Hide thumbs Also See for 2006 SX4:

Table of Contents

8A-1 Seat Belts:

Seat Belts

If replacing seat belt is necessary, replace buckle and seat belt together as a set. This is for the reason

of ensuring locking of tongue plate with buckle. If these parts are replaced individually, such a locking

condition may become unreliable. For this reason, SUZUKI will supply only the spare buckle and seat

belt assembly in a set part.

Before servicing or replacing seat belts, refer to the following precautionary items.

• Seat belts should be normal relative to strap retractor and buckle portions.

• Keep sharp edges and damaging objects away from belts.

• Avoid bending or damaging any portion of belt buckle or latch plate.

• Do not bleach or dye belt webbing. (Use only mild soap and lukewarm water to clean it.)

• When installing a seat belt anchor bolt, it should be tightened by hand at first to prevent cross-threading and then to

specified torque.

• Do not attempt any repairs on retractor mechanisms or retractor covers. Replace defective assemblies with new

replacement parts.

• Keep belts dry and clean at all times.

• If there exist any parts in question, replace such parts.

• Replace belts whose webbing is cut or otherwise damaged.

• Do not put anything into trim panel opening which seat belt webbing passes through.

S6RW0C8100001

Table of Contents