5.20 - Color Representation Not Correct - Minolta magicolor 330 Service Manual

Primary Fault Isolation Procedures

5.20 - Color Representation Not Correct

RS517X
Step
SOFTWARE ISOLATION
1
Reload the printer driver software.
Is the color correct?
Replace the Controller PWB (RRP 9.129)
2
Is the color correct?
Replace the MCU PWB (RRP 9.123)
3
Is the color correct?
Replace the Rotary Sensor (RRP 9.68)
4
Is the color correct?
DEVELOPER ASSEMBLY INSPECTION
Inspect the four Toner Cartridges that are installed in the four Devel-
oper Assemblies.
5
Are the correct color Toner Cartridges installed?
5-38
PROBLEM
The color of the printed image is completely different than the computer image. THE
PRINTER DISPLAYS NO ERROR MESSAGE.
• No recommendations
Actions and Questions Yes
Problem solved
Problem solved
Problem solved
Problem solved
magicolor 330 - Base Engine Service Manual
No
Go to step 2
Go to step 3
Go to step 4
Go to step 5
Replace the
Developer in
the contami-
nated Devel-
oper Housing
(RRP 9.60,
9.62, 9.64, and
9.66) and
install the
Toner Car-
tridges in the
correct Devel-
oper Assembly